SPRHS127C
Ask a Question
Schematics
3D Model
PDF
SPRHS127C
Coupled Inductor

Low DCR, high rated current.

Magnetic shielded structure.

Lead free product, RoHS compliant.

Carrier tape packing, suitable for SMT process.

 Widely used in buck converter, laptop, displayer,network communication equipment, and etc.

Operating temperature : -40℃ ~ +125℃(Including coil’s temperature rise).

Developed for use with ST model LED6001 PWM-dimmable single channel LED driver with integrated boost controller,etc.  TI model UCC27511 forward converter. (Check the IC reference tool)

Related Articles

A Perfect Choice for GaN Power Solutions with Codaca's CSBA Series High Current Power Inductors
A Perfect Choice for GaN Power Solutions with Codaca's CSBA Series High Current Power Inductors
Upgraded Molded Power Inductor CSEG Series
Upgraded Molded Power Inductor CSEG Series

Design Tool

No Data

Size

SPRHS127C

Notes

■ All data is tested based on 25℃ ambient temperature.

■ Inductance measure condition at 100kHz, 0.1V.

■ Leakage inductance is for L1 and is measured with L2 shorted.

■ Saturation current:the actual value of DC current when the inductance decrease corresponding percentage of its initial value.

■ Temperature rise current:the actual value of DC current when the temperature rise is ΔT40℃(Ta=25℃).

■ Special remind:Circuit design, component placement, PCB size and thickness, cooling system and etc.

■ All will affect the product temperature. Please verify the product temperature in the final application.

Save

■ Product in packing storage condition : temperature 5~40℃, RH≤70%.

■ If taking out for use, the remaining products should be sealed in plastic bags and preserved in accordance with the above conditions, to avoid oxidation of terminals (electrodes), affecting soldering status.

■ A storage of Codaca Electronic products for longer than 12 months is not recommended within other effects, the terminals may suffer degradation, resulting in bad solderability. Therefore, all products shall be used within the period of 12 months based on the day of shipment.

■ Do not keep products in unsuitable storage conditions, such as areas susceptible to high temperatures, high humidity, dust or corrosion.

■ Always handle products with care.

■ Don't touch electrodes directly with bare hands as oil secretions may inhibit soldering.

■ Always ensure optimum conditions for soldering.

Related product

SPRHS125C
SPRHS125C

Inductance:3.30~1000.00μH

Isat:0.73~14.10A

SPRHS1210C
SPRHS1210C

Inductance:6.80~47.0μH

Isat:5.70~15.5A

SPRHS1514A
SPRHS1514A

Inductance:22.0~1000.0μH

Isat:1.60~10.2A

Product Video

No Data